Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It is discrete and does not have LED indicators or key fobs, and is concealed in the wiring of your vehicle.
It also allows users to temporarily disable the system through Transport Mode to use it when they are renting out their vehicle. This guide will guide you through the installation of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning and relay attacks. The system links directly to your vehicle's ECU and is protected by a unique PIN code that you choose. It is not detected by thieves using diagnostic scanners and other advanced methods. It cannot be disabled using circuit cuts.
The system is simple to use, but it's important to have an expert installation to ensure a smooth and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
First, the installer must disconnect your battery in order to avoid accidental airbag deployment or short circuits. After this is completed the installer is now able to begin work. Basic hand tools can be used to make precise connections. A multimeter is a great tool to verify electrical values. Insulation tape and cable tie are essential to protect connections and keep wiring neat. In addition, the user's manual gives specific guidelines that are specific to your Ghost Immobiliser model.
During the installation, it is crucial to select an area for grounding that is free of paint and debris. Installers must also ensure that the immobiliser's wires CAN H & can L are connected to the correct ECU ports. Depending on the model, these wires could require soldering or plugged into. A top-quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be activated by the customer after the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer must press the service icon on the dashboard five times within two seconds. After that, the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for anyone who regularly rents out their cars on platforms such as Turo. Having an immobiliser can also lower insurance costs since it greatly reduces the chance of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started even the theft or copies the key. This is due to its advanced technology that is designed to stop the car's engine from starting without the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN, allowing direct communication with the ECU. It makes use of buttons already on the dashboard and wheel to create a unique sequence that only you know which makes it impossible for others to start your vehicle. This is the most secure security system to protect your most precious possessions, keeping its value intact when you want to sell it in the future.
Installing a ghost immobiliser is an easy procedure, but it is crucial to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you need to find and locate a permanent 12V power source as well as a good grounding point on the vehicle's chassis. Then, you can start connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to avoid short circuits of electricity.
Once the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. After you've confirmed that everything is functioning properly then you can put the immobiliser in a safe location in the vehicle. Make sure to cover it in a secure manner so that thieves can't alter it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is an excellent deterrent to car thieves. It is impervious to key cloning and hacking and is not able to be disabled without the code. It is simple to use and can be set to an option for a service valet so that your vehicle won't be activated when you take it for an MOT or service.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings for your vehicle.
It's also undetectable to thieves using diagnostic scanning devices. ghost immobiliser birmingham is because the system doesn't send and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. In addition, it doesn't need any modification to your car's existing key fobs.
Enter your sequence for disarming (either two or one button) and then turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your car and drive away safely.
Once installed, the Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while preserving its value. If you ever need to surrender your car to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) as well as a grounding point to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. ghost immobilisers is also recommended to use cable ties to tie and secure the wires, as this reduces the risk of tampering by potential thieves. To avoid making mistakes, make sure to double-check these points and mark them with a label or tape. It's recommended to inspect every connection for signs of wear and tear. Make sure that all connections are securely in place, and are properly sealed. Don't forget to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit is functioning correctly and that all connections are secure and insulated. If there are any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your vehicle's ECU to stop unauthorized motor starting. Its cutting-edge technology protects your vehicle from key cloning and hacking as well as other methods employed by thieves to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to offer the ultimate security for your car. The Ghost's unmatched features, combined with its secluded design, make it a popular option for both drivers who love cars and security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, you must to follow the steps of the installation process. The best place to start is to refer to the vehicle's wiring diagram that serves as a guideline for locating and connecting the wires required. After that, you'll need determine the power source and grounding points. Once you've found them, you will have to mark them so that they are easily identifiable during installation. It is essential to use top-quality materials and tools. Basic hand tools will aid in making precise connections. A multimeter can verify electrical values, and also ensure safety. Cable tie and insulation tape ensure that all connections are neat. Additionally, a user's manual will provide specific instructions tailored to your Ghost model.
It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This step will confirm that the immobiliser is working according to plan, and prevents unauthorised vehicle starts. It is recommended to complete this step regularly as part of your regular inspections of your vehicle to ensure that the system is always functioning correctly.
Once the installation has been completed, you are now able to start driving your car with confidence. The Ghost will keep your pride and joy safe from would-be thieves and ensure that nobody is able to take off with your vehicle without the proper PIN code. The Ghost can be linked to an approved Thatcham tracker, which detects attempts at theft or tampering. This lets you locate your car if it's stolen.
The Ghost is compatible with a wide variety of automobiles, including those from most major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to strict guidelines and procedures for installing our products. This reassures customers, insurers and law enforcement officials that installations are done safely and correctly.